Burner Parts
Blower Speed Control
This solid state speed control is designed for use with PSC (permanent split capacitor) or shaded pole blowers like the ones we use on our MB POWER BURNERS. Ordinary dimmer switches can damage the motors mentioned above.
Price: $53.95
Flame Retention Nozzles
These nozzles are open flame heads designed for high capacities with good flame retention characteristics. High capacities are made possible by large burner area in relation to flame tube size. These nozzles are designed to handle rich gas-air mixtures while using relatively low mixture pressures. Sizes apply to the thread size of pipe that the nozzle is screwed onto (the "T" measurement). See the bottom of our Technical Dowload page for a printable Pipe Sizing Chart that easily measures male and female pipe sizes.
"T" Pipe size | "D" Head Diameter | "L" Length | "O" Opening Diameter | Price |
2 inches | 3 inches | 2.5 inches | 1.5 inches | $139.00 |
2.5 inches | 3.6 inches | 2.9 inches | 1.7 inches | $209.00 |
Spark Ignition Module
The CAM-STAT P120 is used to light a standing pilot or protect a standing pilot from being extinguished. The unit works by emitting very intense, pulsed electrical arcs. The electrode senses a flame outage in less than 1 second and begins pulsing at 300 cycles per minute until the flame is re-established. It's automatic and instant lighting makes this unit a very safe and trouble-free addition. Must be wired to a normally grounded 120Vac line. (cannot use GFI or AFI circuitry) Price: $ 109.50
Heavy Duty Electrode
For those requiring a heavier and longer (6") electrode, this unit can be used with the Cam-stat P120 above. A more durable electrode than supplied with the Cam-Stat. Heavy silicon, high-temp wire with spark plug cage is the wiring method.
Electrode: $19.95 Wire w/cage & boot: $4.50 per foot
Electrode: $19.95 Wire w/cage & boot: $4.50 per foot
Universal Intermittent Pilot Control
This safety control is designed for indirect burner ignition and supervision. Used with a rectifying pilot, it provides spark ignition and flame monitoring with shutdown times under 1 second. Can be used with all fuel gases. This is a 24volt system designed to be used with 24volt solenoids.
Price: $159.00
Price: $159.00