Ward Burner Systems

Home

Newsletter

Join the List!

Burners & Parts

Power Burners

Venturi Burners

Rectified Burners

Raku Burners

Burner Components

Valves & Hose

Fittings & Clamps

Safety Valves & Thermocouples

Regulators & Blowers

Other Products

Ceramic Fiber Products

Brick & Mortars

Pyrometers & Controllers

Pressure Gauges

Orifice Charts & Plugs

Raku Accessories

Gloves & Mittens

Protective Clothing

Custom & Unusual Projects

Technical Info

Data Guide

Sample Calculations

Clay Times Articles

Technical Downloads

Basic Glossary

Basic Troubleshooting

Burner Placement

Forced Air vs. Venturi Burners

Ordering Info

Receive A Catalog

Burner Ordering Info

General Ordering Info

Mail/Fax Order Form

Site Map

Contact Us

 
Fittings & Clamps
Brass Fittings

Male Flare to Male Pipe

1/4" male pipe x 3/8 flare $2.05
3/8" male pipe x 3/8 flare $2.25
1/2" male pipe x 3/8 flare $2.45

Female Pipe to Male Flare

1/4" female pipe x 3/8 flare $2.05
3/8" female pipe x 3/8 flare $2.25
1/2" female pipe x 3/8 flare $2.45

Full Union Male to Male

3/8" male flare $3.25

Flare Nut

3/8" flare nut $.95
1/4" flare nut $.85

Swivel Nut Connector - Female

3/8 female flare $4.50

Male Pipe to Male Flare 90°

1/8" male pipe x 1/4" flare $2.75

Male Flare "T"

3/8 flare $5.95

Male Flare Cross

3/8 flare $6.95

90° Truck Valve (compression or flare)

1/8" male pipe x 1/4": $10.95

Female Pipe to Compression

1/8" female pipe x 1/4"OD: $3.25

Needle Valve - Compression to
Compression

1/4"OD x 1/4"OD: $8.50

POL Tank adaptor with hand wheel

POL x 1/4" male pipe: $8.50


Quick Connects

Quick connectors allow rapid connection of gas lines. These fittings are "full port", allowing low pressure gases to be used without flow restrictions. Note: These valves DO NOT provide shutoff when disconnected. Shutoff valves MUST be upstream. Both parts in set with female pipe fittings.

 

 

1/2" Price: $29.50             3/4" Price: $43.50             1" Price: $55.00


 

Pipe Clamps

Pipe Clamps can be used to hold burners or connect Ransome type burners to larger burners when used in tandem. All clamps accept a 3/8 threaded rod except the
2 1/2" size which uses a 1/2" rod.

1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
$5.95
$6.25
$6.95
$8.95
$11.45
$15.75
$22.25

Pilot Clamps

These clamps come preassembled and hold the Ransome Piggyback Pilots to the main burner.

2" x 1/2" Price: $24.50

2 1/2" x 1/2" Price: $32.50




Ward Burner Systems
PO Box 1086 • Dandridge, TN • 37725
(865) 397-2914 phone • (865) 397-1253 fax

info@wardburner.com