Ward Burner Systems

Customized Combustion Equipment

 
Valves & Hose
Propane Hose


These 1/4" ID propane hoses are rated @ 1750 psi burst pressure and 350 psi operating pressure. All hoses come with 3/8" swivel female flare fittings. Ideal for high pressure propane. NOTE: Use only hoses rated for the gas you are using. DO NOT substitute welding hoses or other types of hoses. Other diameters and lengths are available by custom order.

 

 

Length
2ft
3ft
4 ft
5 ft 6 ft 8 ft
10ft
12ft
Price
$14.50
$16.95
$19.95

$22.95

$26.95
$32.95
$38.95
$44.95

For Lengths over 12' add $3.75 per foot


Flexible Gas Connectors

These CSA approved connectors make hookup to gas supply a snap. We carry the large size (1/2" interior diameter) to allow large volume, low pressure gas hookup. One end has a 1/2" male pipe connection, the other a 1/2" female pipe connection. Stainless Steel construction. For Low pressure use only (below 1/2 psi.)

24" $27.50                36" $31.50              48" $36.50


Gas Cocks

Gas cocks provide 100% positive shut off to downstream units. These forged brass body valves feature smooth quarter turn operation. The chrome plated ball is self cleaning. The special seats will seal at both high and low pressures. CSA approved.

1/2" Price: $9.95                 3/4" Price: $12.50



Ball Valves

These full port ball valves (on the left) are CSA & UL approved. They provide smooth control with the ability to handle full flow amounts especially in low pressure situations. Available in sizes up to 4". (call for prices on sizes not listed)

1/2" Price: $17.95

3/4" Price: $22.95


Lock Not Included

Locking Ball Valves

These full port valves feature the same characteristics as the valves above, but can be locked out in either open or closed positions. This is a must for detachable burner systems on charged lines.

1/2" Price: $31.95

3/4" Price: $36.95


 
 
 
Needle Valves

Needle Valves provide smooth, precise control for burner operation. They will not “wabble” or change position during the firing. A must if you really need to “fine tune” your burners. Rated to 400psi WOG.(water, oil, gas). NOTE: though not specifically CSA approved for fuel gases, many local agencies accept needle valves for such use.

1/2" Price: $52.95                     3/4" Price: $59.95